A INTRO OF CNC PROGRAMMING ENHANCED LEARNING SYSTEM :
The CNC Enhanced Learning System includes the CNC Programming Student Workbook and a DVD with the following Videos and support files on it.Self-Learning Videos NCPlot Installation Software To view what’s on the DVD just follow the instructions below. We encourage you to take a few moments to watch the Getting Started video on the DVD as it provides an overview of how the system works.
Just pop the DVD into your computer, the autorun feature should display the AutoPlay window. Click on the Run CNC-Mill.exe file as shown below. Note, if this window is not displayed after putting the DVD into your computer, go to the file manager feature on your computer and select the DVD drive and double click on the Run CNC-Mill.exe file. CNC PROGRAMMING ENHANCED LEARNING SYSTEM
The following Menu Screen should appear;
The Menu is your easy access to the Instructional Videos that will guide you through the content and provide you with all the information you need to get through this workbook. You will notice that there are 10 Lessons and a Getting Started link. Each Lesson matches the corresponding lesson in this workbook. Be sure to watch the video first, it will guide you to refer to the workbook. Your first task is to watch the Getting Started Video.
Don’t worry about taking notes or filling out anything in the workbook while you watch the Getting Started Video, it is just a preview of what to expect. The second item on the DVD is the NCPlot installation file. We have provided this to you free of charge so you can install NCPlot onto your computer. NCPlot Software enables you to type in the CNC Code (G Code) and watch what it will do. CNC PROGRAMMING ENHANCED LEARNING SYSTEM
It is a handy tool to see if your CNC Programs are correct. To access the NCPlot installation file put the DVD into your computer and locate the NCPlot_V1-2 folder as shown below. Double click on the folder and then double click on the NCPlot_v120.exe file and follow the onscreen instructions.CNC PROGRAMMING ENHANCED LEARNING SYSTEM
Okay let’s get started.
Step 1 – Plug in your headphones or make sure your speakers are plugged in and turned on.
Step 2 – Put the DVD into your computer and launch the menu.
Step 3 – Click on Getting Started and watch the video through to the end. Feel free to pause and rewind the
video if you need to watch something again.
Step 4 – Click on Lesson 1 and then click on Lesson-1 – Unit-1, as indicated it is 9 minutes long.CNC PROGRAMMING ENHANCED LEARNING SYSTEM
Step 5 – Proceed through the Videos in the proper order and make sure to follow along with the Workbook. Good luck and have fun.